Quick Answer
A deload week is a planned easier week of training: cut your sets by about 40 to 50 percent, keep your weights close to normal, and stop each set with 3 to 4 reps in reserve. Take one every 4 to 8 weeks, or sooner when your lifts stall for two or more sessions or your joints ache. Updated November 2026.
Key Takeaways
- Deload every 4 to 8 weeks, or when performance drops, joints ache or sleep and motivation fall.
- Easiest method: cut sets by about half, keep weights, stop at 3 to 4 RIR.
- A deload lasts about one week, and one week of lighter training does not cost you meaningful muscle.
- Beginners who progress every session usually do not need one yet.
1. What is a deload week?
A deload week is a planned, short period of easier training that lets accumulated fatigue drop so you can keep progressing. In practice you cut your sets by roughly 40 to 50 percent, keep your weights close to normal, and stop most sets with 3 to 4 reps in reserve (RIR). It usually lasts one week, and you then return to your normal program. A 2023 Delphi consensus by Bell and colleagues in Sports Medicine - Open, which gathered the opinions of experienced coaches and researchers, describes deloading in similar terms: a deliberate, temporary reduction in training stress.
Note that this is expert opinion rather than a trial. Good evidence on the best way to deload is limited, so the numbers here are coaching practice, not lab-tested rules.
2. When should you take a deload week?
There are two ways to decide: on a schedule or when your body tells you.
- Scheduled: every 4 to 8 weeks of hard training. Newer lifters can often go 8 weeks or longer, while advanced lifters on high volume or heavy lifting may need one every 4 to 6 weeks.
- Reactive: when you see signs that fatigue is winning.
Signs it is time:
- Your performance stalls or drops for two or more sessions in a row, even though you ate and slept normally.
- Joints and tendons ache, especially elbows, shoulders, knees or lower back.
- Warm-up weights feel heavy and your RIR estimates keep creeping toward failure.
- Sleep quality is down and your motivation to train is low for more than a week.
One bad day does not mean you need a deload. Look for a pattern across a couple of weeks. If you track RIR in the UltraFit360 app, a rising effort at the same weights is an easy pattern to spot.
3. Why does deloading help?
Training breaks the body down a little and you adapt as you recover. When you push hard for weeks, fatigue can build faster than you recover, especially in joints and connective tissue, and your performance flatlines. A lighter week lets fatigue clear while you keep practicing lifts at near-normal loads. Many lifters report feeling stronger and fresher afterward, and that is the main practical reason people keep deloads in their plan.
If you are a beginner who trains three days a week and progresses every session, you probably do not need one yet. Deloads matter more as weights get heavier and recovery gets tighter.
4. How do you deload?
There are three common methods. Pick one, do not stack all three.
| Method | What you change | Best for |
|---|---|---|
| Cut volume | Keep weights and rep targets, do about half the sets (40 to 50 percent fewer) | Most lifters; keeps technique sharp |
| Cut load | Drop weights about 10 to 20 percent, keep sets and reps | When joints are sore from heavy lifting |
| Cut effort | Same exercises, stop at 3 to 4 RIR instead of 1 to 2 | Lifters who tend to train close to failure |
Volume cuts are the most popular because they keep intensity (the weight on the bar) high, which helps you hold on to strength. Effort cuts are easy to run if you already track reps in reserve. A full week off the gym is also a reasonable choice if you are run down, traveling or dealing with an injury.
5. What does a sample deload week look like?
Here is a deload for the 4-day program in our upper lower split guide. We show the two heavy days. Apply the same rule to the volume days: cut sets by about half and stop at 3 to 4 RIR. This is our suggestion.
| Day | Exercise | Normal week | Deload week |
|---|---|---|---|
| Upper 1 | Barbell bench press | 4 x 4-6 at 2 RIR | 2 x 4-6 at 4 RIR |
| Barbell row | 4 x 5-8 at 2 RIR | 2 x 5-8 at 4 RIR | |
| Overhead press | 3 x 6-8 at 2 RIR | 2 x 6-8 at 4 RIR | |
| Lat pulldown | 3 x 8-10 at 2 RIR | 2 x 8-10 at 4 RIR | |
| Dumbbell curl and triceps pushdown | 2 x 8-12 each at 1 RIR | 1 x 8-12 each at 3 RIR | |
| Lower 1 | Back squat | 4 x 4-6 at 2 RIR | 2 x 4-6 at 4 RIR |
| Romanian deadlift | 3 x 6-8 at 2 RIR | 2 x 6-8 at 4 RIR | |
| Leg press | 2 x 8-10 at 2 RIR | 1 x 8-10 at 4 RIR | |
| Leg curl | 3 x 8-12 at 1 RIR | 2 x 8-12 at 3 RIR | |
| Calf raise | 3 x 8-12 at 1 RIR | 2 x 8-12 at 3 RIR |
The weights stay roughly the same as the previous week, since stopping 2 to 3 reps earlier makes them feel lighter. Sessions should be shorter, around 30 to 40 minutes. Keep walking and doing light activity as usual.
6. Will you lose muscle during a deload?
Unlikely. A week of reduced training does not erase muscle or strength in most lifters, and holding your weights while cutting sets is designed to preserve them. Keep eating enough protein, around 0.7 to 1 g per lb (1.6 to 2.2 g per kg) per day, and do not slash your calories just because you trained less.
7. Can you deload without taking a full week?
Yes, though a week is the most common approach. Some lifters use a short "mini-deload" of 3 to 4 days, or deload one body part that is beat up (for example, elbows after heavy pressing) while training the rest normally. For lifters on a 6-day push pull legs program, it is common to schedule the deload after every fourth to sixth week. The key is that volume or effort goes down for a planned period, not that you stop at random.
8. How do you plan deloads into a program?
- Choose your cycle length (4 to 8 weeks) and write the deload into the calendar.
- In the weeks before it, let effort climb gradually from about 3 RIR to 1 RIR, as in progressive overload programs.
- Take the deload week using one of the methods above.
- Restart the next block with weights a touch lighter than where you stopped, and build again.
If you add sets as you go, a deload also resets your volume. That ties in with our guide on how many sets per muscle group: start the next block near the low end of your range and climb again.
The UltraFit360 AI coach can look at your logged sets and RIR and suggest a deload when your numbers stall, then rebuild the week for you. The app is currently free.
Bottom line
Take a deload every 4 to 8 weeks, or sooner if performance stalls or joints ache. Cut sets by about 40 to 50 percent, keep your weights similar, stop sets at 3 to 4 RIR, and go back to normal training the next week.
Related reading
9. Frequently Asked Questions
Q1: How often should I take a deload week?
A1: Every 4 to 8 weeks of hard training is the usual range. Newer lifters can often go longer, and lifters on high volume or very heavy lifting may need one more often.
Q2: What should I do during a deload week?
A2: Train the same exercises with about 40 to 50 percent fewer sets, keep the weights similar and stop at 3 to 4 reps in reserve. Keep walking and eating normally.
Q3: Do I lose muscle on a deload week?
A3: Very unlikely. A week of reduced training does not remove meaningful muscle or strength for most lifters, especially if you keep weights near normal and eat enough protein.
Q4: Do I need a deload if I feel fine?
A4: Not always. If your lifts keep going up and nothing hurts, you can extend the training block. A planned deload is still a good safety net after 6 to 8 hard weeks.
Q5: Is it better to deload or take a week off?
A5: Both work. A deload keeps you practicing the lifts and holds your routine. A full week off can be better if you are sick, injured or mentally burnt out.
Q6: How do I know when to deload?
A6: Look for a pattern: stalled or falling lifts across two or more sessions, aching joints, heavy warm-ups, poor sleep or low motivation for more than a week.
Scientific References & Clinical Sources
- Bell L, Strafford BW, Coleman M, et al. Integrating deloading into strength and physique sports training programmes: an international Delphi consensus approach. Sports Med Open, 2023. Find on PubMed
- Zourdos MC, Klemp A, Dolan C, et al. Novel resistance training-specific rating of perceived exertion scale measuring repetitions in reserve. J Strength Cond Res, 2016. Find on PubMed
- Schoenfeld BJ, Ogborn D, Krieger JW. Dose-response relationship between weekly resistance training volume and increases in muscle mass: a systematic review and meta-analysis. J Sports Sci, 2017. Find on PubMed
This article is general information and not medical advice. The programs above are suggestions, not prescriptions.
Track sets and RIR in the UltraFit360 app so you can see when effort is creeping up, and let the AI coach plan your next deload.