Quick Answer
A push pull legs (PPL) split divides your training into push, pull and leg days. Run it 3 days a week to train each muscle once, or 6 days a week to train each muscle twice at roughly 9 to 12 hard sets per large muscle, stopping most sets with 1 to 3 reps in reserve and adding reps or weight when you reach the top of your rep range. Updated November 2026.
Key Takeaways
- PPL groups muscles by movement: push (chest, shoulders, triceps), pull (back, biceps) and legs.
- Three days a week trains each muscle once. Six days a week trains each muscle twice, which is usually better for muscle growth.
- Use double progression: add reps within a range, then add weight when you hit the top.
- Keep most sets at 1 to 3 RIR and take a deload week every 4 to 8 weeks.
1. What is a push pull legs split?
A push pull legs (PPL) split sorts your lifts by movement. Push days train chest, shoulders and triceps. Pull days train back, rear delts and biceps. Leg days train quads, hamstrings, glutes and calves. Run it three days a week and each muscle gets hit once. Run it six days a week and each muscle gets hit twice, which is where PPL earns its reputation. If you are still choosing a split, our workout splits guide compares all the main options.
The tables below are our suggested programs, built from common coaching practice rather than a single study. RIR means reps in reserve, how many more reps you could have done when you stopped the set. RIR 2 means two left in the tank. Our guide to reps in reserve explains how to judge it.
2. Who is push pull legs best for?
PPL suits lifters who have a few months of training behind them, like to train on a fixed rhythm and can reliably get to the gym five or six days a week. Splitting the body into three groups lets you do more sets per muscle in each session without sessions running over 70 minutes. It is a poor fit if your schedule changes every week, because missing one day leaves a muscle untrained.
- Total beginners: start with full body or a 4-day split. PPL has more volume than you need yet.
- 3 days a week: PPL works, but each muscle is trained only once a week.
- 6 days a week: the classic version, twice-weekly frequency for everything.
- 4 or 5 days: see the upper lower split or a 5 day workout split.
3. What does a 3-day push pull legs program look like?
Train on three non-consecutive days, for example Monday, Wednesday and Friday. Rest 2 to 3 minutes after heavy compound sets and 60 to 90 seconds after isolation work.
| Day | Exercise | Sets x reps | RIR |
|---|---|---|---|
| Push | Barbell or dumbbell bench press | 3 x 6-8 | 2 |
| Seated dumbbell shoulder press | 3 x 8-10 | 2 | |
| Incline dumbbell press | 3 x 8-12 | 2 | |
| Lateral raise | 3 x 12-15 | 1 | |
| Triceps pushdown | 3 x 10-12 | 1 | |
| Pull | Lat pulldown or pull-up | 3 x 6-10 | 2 |
| Chest-supported row | 3 x 8-12 | 2 | |
| Seated cable row | 2 x 10-12 | 2 | |
| Face pull | 3 x 12-15 | 1 | |
| Dumbbell curl | 3 x 10-12 | 1 | |
| Legs | Back squat or leg press | 3 x 6-8 | 2 |
| Romanian deadlift | 3 x 8-10 | 2 | |
| Leg press or hack squat | 2 x 10-12 | 2 | |
| Lying leg curl | 3 x 10-12 | 1 | |
| Standing calf raise | 3 x 10-15 | 1 |
That is roughly 5 to 8 hard sets per large muscle per week. It is a sensible start, but each muscle is trained once a week, and a 2016 meta-analysis by Schoenfeld, Ogborn and Krieger in Sports Medicine found that training a muscle at least twice a week produced better hypertrophy than once a week when total volume was not matched. If you can train more often, move to the 6-day version or try an upper lower split.
4. What does a 6-day push pull legs program look like?
Run the three days as A, then repeat them as B with slightly different exercises and rep ranges. A common week is Monday to Saturday with Sunday off. Heavier compound work on A days and more moderate reps on B days spreads the stress across the week.
Workout A (heavier)
| Day | Exercise | Sets x reps | RIR |
|---|---|---|---|
| Push A | Barbell bench press | 3 x 5-8 | 2 |
| Standing or seated overhead press | 3 x 6-10 | 2 | |
| Incline dumbbell press | 2 x 8-12 | 2 | |
| Lateral raise | 3 x 12-15 | 1 | |
| Triceps pushdown | 3 x 8-12 | 1 | |
| Pull A | Weighted or assisted pull-up | 3 x 6-10 | 2 |
| Barbell or dumbbell row | 3 x 6-8 | 2 | |
| Face pull | 2 x 12-15 | 1 | |
| Barbell or EZ-bar curl | 3 x 8-10 | 1 | |
| Legs A | Back squat | 3 x 5-8 | 2 |
| Romanian deadlift | 3 x 8-10 | 2 | |
| Lying leg curl | 3 x 10-12 | 1 | |
| Standing calf raise | 3 x 8-12 | 1 |
Workout B (higher reps)
| Day | Exercise | Sets x reps | RIR |
|---|---|---|---|
| Push B | Incline dumbbell press | 3 x 8-10 | 2 |
| Machine chest press or dip | 3 x 8-12 | 2 | |
| Cable lateral raise | 3 x 12-20 | 1 | |
| Overhead triceps extension | 3 x 10-12 | 1 | |
| Pull B | Lat pulldown | 3 x 8-12 | 2 |
| Seated cable row | 3 x 10-12 | 2 | |
| Rear delt fly | 2 x 12-15 | 1 | |
| Hammer curl | 3 x 10-12 | 1 | |
| Legs B | Hack squat or leg press | 3 x 8-12 | 2 |
| Walking lunge | 2 x 10 per leg | 2 | |
| Seated leg curl | 3 x 10-15 | 1 | |
| Leg extension | 3 x 12-15 | 1 | |
| Seated calf raise | 3 x 10-15 | 1 |
Across the week that lands at roughly 9 to 12 hard sets for the big muscles (and about 6 for biceps and triceps, which also get indirect work from rows and presses), which sits close to the 10 to 20 range that we explain in our guide on how many sets per muscle group you need.
5. How do you progress on push pull legs?
Use double progression. Every exercise has a rep range, such as 8 to 12. Start at a weight where your first set lands near the bottom of the range with 1 to 3 reps in reserve. Each session, try to add a rep or two. When you reach the top of the range on every set, add the smallest jump available (2.5 to 5 lb, or 1 to 2.5 kg) and start again at the bottom. Our progressive overload guide covers other methods.
Keep your last set of each compound lift at 1 to 2 RIR and your isolation work at 0 to 1 RIR. Working near failure on everything is not necessary and wears you out on a 6-day schedule. Zourdos and colleagues validated the RIR scale in a 2016 study in the Journal of Strength and Conditioning Research. RIR is an estimate that gets more accurate with practice, so be honest with yourself about how many reps were really left.
6. How should you schedule the week?
| Days per week | Schedule | Frequency per muscle |
|---|---|---|
| 3 | Mon Push, Wed Pull, Fri Legs | 1x |
| 5 | Push, Pull, Legs, then rest, then Push, Pull (rotate) | 1 to 2x |
| 6 | Push, Pull, Legs, Push, Pull, Legs, rest | 2x |
The rotating 5-day version simply picks up the cycle where you left off. It is flexible, but muscles get uneven frequency from week to week, so the 6-day layout is cleaner if you can stick to it.
7. Common push pull legs mistakes
- Training every set to failure. Six days of that piles up fatigue fast. Keep most sets at 1 to 3 RIR.
- Too many sets per day. 20 to 24 total sets for one session is plenty. More is usually junk volume.
- Skipping legs. Leg day is the one people drop first. Without it you are running a push pull split.
- No rest week. After 4 to 8 weeks of hard training, plan a deload week.
- Never changing anything. If a lift stalls for three or four sessions, change the rep range or swap the exercise.
The UltraFit360 app lets you log sets, reps and RIR for every exercise, shows weekly volume per muscle, and lets the AI coach adjust a plan if you miss a day. The app is currently free.
8. Is PPL better than a bro split?
For most people, yes, because a bro split trains each muscle once a week while a 6-day PPL trains it twice. We compare them in detail in bro split vs PPL. If you want the same twice-a-week frequency with only four days in the gym, an upper lower split is the usual answer.
Bottom line
Run PPL three days a week if that is all you can manage, or six days a week for twice-weekly frequency and about 9 to 12 hard sets for the big muscles. Train most sets at 1 to 3 RIR, progress with double progression, and plan a deload every 4 to 8 weeks.
Related reading
9. Frequently Asked Questions
Q1: How many days a week should I do push pull legs?
A1: Six days a week trains each muscle twice, which is the classic setup. Three days a week works if that is all you can fit, but each muscle is trained only once. A rotating 5-day version also works.
Q2: Is push pull legs good for beginners?
A2: It can work, but most true beginners do better with a full-body or 4-day split first. PPL has more volume than a new lifter needs, and it requires a reliable schedule.
Q3: How many sets per muscle per week on PPL?
A3: A 6-day PPL gives roughly 9 to 12 hard sets per large muscle per week, close to the commonly cited 10 to 20 range. A 3-day version gives about 5 to 8.
Q4: Should I train to failure on push pull legs?
A4: Not on most sets. Stop compound lifts at 1 to 2 reps in reserve and isolation work at 0 to 1. Going to failure on every set makes a 6-day week hard to recover from.
Q5: What order should I do push pull legs in?
A5: Push, Pull, Legs, then repeat, with a rest day after the second Legs day or wherever your schedule needs it. The order matters less than hitting each muscle twice a week.
Q6: Can I do push pull legs and still lose fat?
A6: Yes. The split does not change your calorie needs. Eat in a modest deficit, keep protein high and keep lifting heavy to hold on to muscle.
Scientific References & Clinical Sources
- Schoenfeld BJ, Ogborn D, Krieger JW. Effects of resistance training frequency on measures of muscle hypertrophy: a systematic review and meta-analysis. Sports Med, 2016. Find on PubMed
- Zourdos MC, Klemp A, Dolan C, et al. Novel resistance training-specific rating of perceived exertion scale measuring repetitions in reserve. J Strength Cond Res, 2016. Find on PubMed
This article is general information and not medical advice. The programs above are suggestions, not prescriptions.
Log every set with RIR in the UltraFit360 app and let the AI coach adapt your push pull legs plan when life gets in the way. See your targets with the free calorie calculator.